Date: Mon, 8 Jun 1998 20:18:03 -0700
To: Bill Fink <bill@wizard.gsfc.nasa.gov>
From: "David A. Guevara" <dguevara@mail.arc.nasa.gov>
Subject: Re: Peering with HPCC-ESS router, access jsimpson-h over
multipoint vc set up on nren gsfc switch. let me know when you move the
hpcc router and I'll delete the old entries.
-- david
At 3:59 PM -0700 6/8/98, Bill Fink wrote:
>David,
>
>Actually, we will be moving our HPCC router sometime in the next
>week or two, and at that point the VC will need to go to port 1A3
>instead of port B2. Therefore, could you please add a VC 0.101
>between ports B1 and A3 on the Goddard NREN switch, making it a
>multipoint VC. That way, we can make the move transparently,
>and just delete the 0.101 VC between ports B1 and B2 after our
>router has been moved and is operational in its new location.
>
> -Thanks
>
> -Bill
>
>
>
>> My mistake. I tho't we were using the HPCC-ESS switch on port
>> A3 of the NREN GSFC switch. I changed it to use the GSFC ISO
>> switch on port B2 and the peering appears to be operational.
>> I will check connectivity and let you know if I discover any problems.
>>
>> -- david
>>
>> At 1:41 AM -0400 6/6/98, Bill Fink wrote:
>> >David & Ken,
>> >
>> >I've set up rtr-atm (198.119.5.251) to BGP peer with the
>> >NREN router (198.119.5.250) via PVC 0.101. I verified that
>> >it was successfully advertising 169.154/16 and 128.183.33/24
>> >(by testing with another one of our routers as an additional
>> >peer). However, I can't ping 198.119.5.250, since the 0.101
>> >VC doesn't exist yet on the Goddard NREN router (and I don't
>> >know if the 198.119.5.250 address has been configured yet on
>> >the NREN router. In any event, hopefully we're not too far
>> >away from establishing connectivity to Goddard for the
>> >Turbulent Convection application investigators at the VBNS
>> >sites.
>> >
>> > -Thanks
>> >
>> > -Bill